Whatsapp
Posted : Friday, October 06, 2023 11:58 PM
*Job Title: Construction Manager*
*Location: Jefferson, WI (Onsite)- Monday-Sunday 6:00pm-4:00am; 6X10=60 hours - 2nd shift position*
Required experience below:
• 100% ONSITE BASED - Jefferson, WI.
(No Exceptions) • MEP construction experience in the Food and/or CPG manufacturing industry.
• MEP = Mechanical, Electrical and Plumbing • CPG = Consumer packaged goods • Experience managing projects through all phases of construction: Project Management, Building Design and Construction, Scheduling, Cost Modeling and Risk Analysis • Must have one: PMP, PMI, GAC, CCM, CMCI, CMAA or similar • Must have: OSHA 30, CPR, Fall protection • This position is 100% onsite based out of Jefferson, WI (No exceptions for WFH) • Please note: This is a 2nd shift position (Monday-Sunday 6:00pm-4:00am; 6X10=60 hours).
Schedule could shift +/- 1 hour to allocate resources appropriately.
Overtime pay 1.
5X • Local candidates preferred, but open to relocation • Please indicate candidate's location on resume header • Relocation at own expense.
No per diem, home trips or other allowances • Must be able to climb ladders and stairs.
Requires many miles of daily walking through a construction site The team is looking for a Construction Manager (2nd shift) to support the Jefferson expansion project.
MUST HAVE: Strong MEP construction experience in the food and/or CPG manufacturing industry.
*POSITION SUMMARY:* The CM is the point of contact over all site construction activities for CapEx projects or one large project using high level communication to inform engineering, the plant staff of site construction and safety activities.
They will also have the technical background to prepare and support EWOs, EVM, QIS tools that provide input for project cost reports via SAP.
CM supports field technical issue resolution, collaborating with clients and contractors to assist delivering technical as well as non-technical solutions, utilizing their expertise and construction knowledge.
The CM shall possess strong leadership, managerial and communication skills and be able to articulate objectives clearly and concisely with NPE, vendors, contractors, Field Staff, Project Staff, and the Factory Staff.
Duties may include preparing, coordinating and reviewing process equipment and building drawing packages, managing internal, contract and other resources involved in the pre-design, construction, engineering and supervising, assigning, scheduling, coordinating and evaluating contractor work.
Reports issues related to schedule, cost, progress, safety and design directly to Project Engineering Managers, Plant Project Stakeholders, and/or Contractor Managers.
*PRIMARY RESPONSIBILITIES:* Manage Financial, Safety and schedule Key Performance Indicators, then will redirect any deviation or propose alternatives to PEM.
If required, manage various CM (I, II) resources when executing major capital projects.
In conjunction with PEM, review SAP project details and review and update Microsoft Project, PETPRO, BIM 360, CXAlloy as required.
Organized manage and establish asset tracking, tagging, and project close-out activities with facility resources to determinate depreciation and final cost transfer.
Track, sign for, maintain, and positively transfer NPE Procured Field Equipment and NPE Assets.
Maintain a safe, clean and orderly work site.
Safety is the most important responsibility of the Owners Field Representative.
The CM is directly accountable for the direct execution, inspection, and Quality acceptance of the project per relevant specifications, drawings, scope, schedule and budget.
The CM shall be forward looking.
They are directly responsible for coordinating, driving, and maintaining all the schedules within the field and ensure that all work is being planned no less than 6 weeks out and is completed according to the contract schedule.
Schedules include 5 Forward /1 Back Week Look Ahead, Detailed Gantt, and Milestones.
The CM will Organize with PEM and Leads and all other project Site Staff to be assigned to a single project.
The CM will be the Construction Lead for any partial specific project.
The CM will directly coordinate with Project Support Staff, vendors, NPE, PEM, contractors, sub-contractors, plant, and suppliers on all matters related to the project.
Prepares and maintain Project Specific EWO and CO Documentation for CM processing.
Manage Field Inputs, RFIs, Submittals through CX Alloy or available tool.
Provide daily and weekly reports to the PEM.
These reports should include important items, which may affect the project.
The plant engineer should be copied on all reports.
Conduct weekly planning meeting with the plant engineer or designate, to determine access times for construction activities.
A CM will lead the shared FIELD support team which may consist of various on-site supporting project resources (Scheduler, Safety, cost control, expeditor, etc.
).
BASIC QUALIFICATIONS/CERTIFICATION (Minimum): 1.
Experience managing projects through all phases of construction 2.
PMP, PMI, GAC, CCM, CMCI, CMAA or similar 3.
OSHA 30 4.
CPR 5.
Fall protection *EXPERIENCE (Years/Type): * 1.
Minimum of fifteen (15) years of Construction Management related.
MUST HAVE: Strong MEP construction experience in the food and/or CPG manufacturing industry.
2.
More than 3 years experience software applications (Microsoft Word, Excel, Cx Alloy, and others) *SKILLS: * 1.
Thoroughly understand and utilize Information Technology.
This includes but is not limited to; BIM 360 and BIM Field, File Sharing Systems (SharePoint, OneDrive, etc.
), Cx Alloy, Pet Pro, SAP, MS Windows, Adobe Acrobat, MS Office Suite programs (Word, Excel, Project, Access, One Note, etc.
) 2.
Must possess strong decision-making abilities 3.
Must be able to climb ladders and stairs.
Requires many miles of daily walking through a construction site 4.
Must able to work independently and possess good interpersonal skills 5.
Must be able to handle numerous technical, commercial, and administrative skills 6.
Thorough understanding of Project Management, Building Design and Construction, Scheduling, Cost Modeling and Risk Analysis is required 7.
Must be highly articulate, have a clear and analytical approach to solving problems 8.
Steel toe shoes are required and to be provided at own expense.
Other safety gear will be provided by the facility Job Type: Contract Pay: $80.
00 per hour Expected hours: 40 – 60 per week Experience level: * 10 years * 11+ years * 8 years * 9 years Schedule: * 8 hour shift Experience: * Construction management: 10 years (Required) * MEP: 5 years (Required) * CPG Consumer packaged goods/ Manufacturing: 5 years (Required) * Manufacturing industry: 5 years (Required) License/Certification: * OSHA /CPR Certification (Required) Ability to Commute: * Jefferson, WI (Required) Ability to Relocate: * Jefferson, WI: Relocate before starting work (Required) Work Location: In person
(No Exceptions) • MEP construction experience in the Food and/or CPG manufacturing industry.
• MEP = Mechanical, Electrical and Plumbing • CPG = Consumer packaged goods • Experience managing projects through all phases of construction: Project Management, Building Design and Construction, Scheduling, Cost Modeling and Risk Analysis • Must have one: PMP, PMI, GAC, CCM, CMCI, CMAA or similar • Must have: OSHA 30, CPR, Fall protection • This position is 100% onsite based out of Jefferson, WI (No exceptions for WFH) • Please note: This is a 2nd shift position (Monday-Sunday 6:00pm-4:00am; 6X10=60 hours).
Schedule could shift +/- 1 hour to allocate resources appropriately.
Overtime pay 1.
5X • Local candidates preferred, but open to relocation • Please indicate candidate's location on resume header • Relocation at own expense.
No per diem, home trips or other allowances • Must be able to climb ladders and stairs.
Requires many miles of daily walking through a construction site The team is looking for a Construction Manager (2nd shift) to support the Jefferson expansion project.
MUST HAVE: Strong MEP construction experience in the food and/or CPG manufacturing industry.
*POSITION SUMMARY:* The CM is the point of contact over all site construction activities for CapEx projects or one large project using high level communication to inform engineering, the plant staff of site construction and safety activities.
They will also have the technical background to prepare and support EWOs, EVM, QIS tools that provide input for project cost reports via SAP.
CM supports field technical issue resolution, collaborating with clients and contractors to assist delivering technical as well as non-technical solutions, utilizing their expertise and construction knowledge.
The CM shall possess strong leadership, managerial and communication skills and be able to articulate objectives clearly and concisely with NPE, vendors, contractors, Field Staff, Project Staff, and the Factory Staff.
Duties may include preparing, coordinating and reviewing process equipment and building drawing packages, managing internal, contract and other resources involved in the pre-design, construction, engineering and supervising, assigning, scheduling, coordinating and evaluating contractor work.
Reports issues related to schedule, cost, progress, safety and design directly to Project Engineering Managers, Plant Project Stakeholders, and/or Contractor Managers.
*PRIMARY RESPONSIBILITIES:* Manage Financial, Safety and schedule Key Performance Indicators, then will redirect any deviation or propose alternatives to PEM.
If required, manage various CM (I, II) resources when executing major capital projects.
In conjunction with PEM, review SAP project details and review and update Microsoft Project, PETPRO, BIM 360, CXAlloy as required.
Organized manage and establish asset tracking, tagging, and project close-out activities with facility resources to determinate depreciation and final cost transfer.
Track, sign for, maintain, and positively transfer NPE Procured Field Equipment and NPE Assets.
Maintain a safe, clean and orderly work site.
Safety is the most important responsibility of the Owners Field Representative.
The CM is directly accountable for the direct execution, inspection, and Quality acceptance of the project per relevant specifications, drawings, scope, schedule and budget.
The CM shall be forward looking.
They are directly responsible for coordinating, driving, and maintaining all the schedules within the field and ensure that all work is being planned no less than 6 weeks out and is completed according to the contract schedule.
Schedules include 5 Forward /1 Back Week Look Ahead, Detailed Gantt, and Milestones.
The CM will Organize with PEM and Leads and all other project Site Staff to be assigned to a single project.
The CM will be the Construction Lead for any partial specific project.
The CM will directly coordinate with Project Support Staff, vendors, NPE, PEM, contractors, sub-contractors, plant, and suppliers on all matters related to the project.
Prepares and maintain Project Specific EWO and CO Documentation for CM processing.
Manage Field Inputs, RFIs, Submittals through CX Alloy or available tool.
Provide daily and weekly reports to the PEM.
These reports should include important items, which may affect the project.
The plant engineer should be copied on all reports.
Conduct weekly planning meeting with the plant engineer or designate, to determine access times for construction activities.
A CM will lead the shared FIELD support team which may consist of various on-site supporting project resources (Scheduler, Safety, cost control, expeditor, etc.
).
BASIC QUALIFICATIONS/CERTIFICATION (Minimum): 1.
Experience managing projects through all phases of construction 2.
PMP, PMI, GAC, CCM, CMCI, CMAA or similar 3.
OSHA 30 4.
CPR 5.
Fall protection *EXPERIENCE (Years/Type): * 1.
Minimum of fifteen (15) years of Construction Management related.
MUST HAVE: Strong MEP construction experience in the food and/or CPG manufacturing industry.
2.
More than 3 years experience software applications (Microsoft Word, Excel, Cx Alloy, and others) *SKILLS: * 1.
Thoroughly understand and utilize Information Technology.
This includes but is not limited to; BIM 360 and BIM Field, File Sharing Systems (SharePoint, OneDrive, etc.
), Cx Alloy, Pet Pro, SAP, MS Windows, Adobe Acrobat, MS Office Suite programs (Word, Excel, Project, Access, One Note, etc.
) 2.
Must possess strong decision-making abilities 3.
Must be able to climb ladders and stairs.
Requires many miles of daily walking through a construction site 4.
Must able to work independently and possess good interpersonal skills 5.
Must be able to handle numerous technical, commercial, and administrative skills 6.
Thorough understanding of Project Management, Building Design and Construction, Scheduling, Cost Modeling and Risk Analysis is required 7.
Must be highly articulate, have a clear and analytical approach to solving problems 8.
Steel toe shoes are required and to be provided at own expense.
Other safety gear will be provided by the facility Job Type: Contract Pay: $80.
00 per hour Expected hours: 40 – 60 per week Experience level: * 10 years * 11+ years * 8 years * 9 years Schedule: * 8 hour shift Experience: * Construction management: 10 years (Required) * MEP: 5 years (Required) * CPG Consumer packaged goods/ Manufacturing: 5 years (Required) * Manufacturing industry: 5 years (Required) License/Certification: * OSHA /CPR Certification (Required) Ability to Commute: * Jefferson, WI (Required) Ability to Relocate: * Jefferson, WI: Relocate before starting work (Required) Work Location: In person
• Phone : NA
• Location : Jefferson, WI
• Post ID: 9095799138
